Tyvek / Tychem® 2000 C Accessory

TC0291TYLA0

Tychem® 2000 C Accessory

DuPont™ Tychem® 2000 TC291T YL. Shin-length. Gown with rear closure, knitted cuff with double cuff system, mandarin collar. Stitched and over-taped seams. Yellow.

 
 
 
Hover over image to zoom

Name Description
Full Part Number TC0291TYL00
Fabric/Materials TYCHEM® 2000C
Design Gown with rear closure, knitted cuff with double cuff system, mandarin collar
Seam Stitched and over-taped
Color Yellow
Sizes MD, 2X, 5X
Quantity/Box 25 per box, bulk packed.

FEATURES & PRODUCT DETAILS

DuPont™ Tychem® 2000 TC291T YL. Shin-length gown with wrap-over rear closure, hook and loop neck closure and waist ties. Double cuffs for increased protection and tighter connection with gloves. Elasticated wrists. Knitted cuff (inside) for better comfort. Mandarin collar for improved neck and throat area closure. Available in yellow and sizes MD, 2X and 5X.
Specially designed for use with Tychem® apparel,Tychem® Accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.
Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).
Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

  • Partial body chemical protective clothing, Category III, Type PB [3-B]
  • EN 14126 (barrier to infective agents)
  • Antistatic treatment (EN 1149-1) - on inside; see footnotes
  • Stitched and over-taped seams with barrier tape for protection and strength

ADDITIONAL EQUIPMENT NEEDED

SIZES

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Abrasion Resistance 7 EN 530 Method 2 >1500 cycles 5/6 1
Basis Weight DIN EN ISO 536 83 g/m2 N/A
Bursting Strength (Mullenburst) ISO 2758 500 kPa N/A
Colour. N/A (598) Yellow N/A
Puncture Resistance EN 863 >10 N 2/6 1
Resistance to water penetration AATCC 127 >30 kPa N/A
Resistenza alla rottura per flessione 7 EN ISO 7854 Method B >5000 cycles 3/6 1
Surface Resistance at RH 25%, inside 7 EN 1149-1 < 2,5 • 109 Ohm N/A
Surface Resistance at RH 25%, outside 7 EN 1149-1 No antistatic treatment N/A
Tensile Strength (MD) DIN EN ISO 13934-1 >100 N 3/6 1
Tensile Strength (XD) DIN EN ISO 13934-1 >100 N 3/6 1
Thickness (PPSH-249) DIN EN ISO 534 185 µm N/A
Trapezoidal Tear Resistance (MD) EN ISO 9073-4 >10 N 1/6 1
Trapezoidal Tear Resistance (XD) EN ISO 9073-4 >10 N 1/6 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation

WARNING

PERMEATION DATA

COMFORT

BIOLOGICAL BARRIER

PENETRATION AND REPELLENCY

GARMENT PERFORMANCE

To access secured content from DuPont Please Sign In or Sign Up below