Tyvek
/ DuPont™ Tychem® 4000
SL278B WH
DuPont™ Tychem® 4000
DuPont™ Tychem® 4000 Sleeved Apron. Elastic Wrists. 52" Long. Bound yoke neck with Snaps & Waist Ties. Bound Seams. White.
- FAQ
-
DOUBLE CHECK
Use Double Check to determine if this product is suitable for your hazard scenario.
- Where To Buy
Frequently Asked Questions
SL278B WH
DuPont™ Tychem® 4000
Are TYCHEM® 4000 garments flame resistant or flame retardant (FR)?
Other than Tychem® 6000 FR, Tychem® chemical protective garments will ignite and continue to burn.
Wearing garments made of Nomex® or any other flame-resistant fabric under Tychem® garments, other than Tychem® 6000 FR, will not reduce burn injury during a fire or electric arc exposure. Other than Tychem® 6000 FR, Tychem® garments will burn and possibly melt when exposed to a fire or electric arc flash; this may increase burn injuries even when worn over garments made of Nomex® or any other flame-resistant fabric.
And because Tychem® garments melt, except for Tychem® 6000 FR do not wear Tychem® garments under a garment made of Nomex® or any other flame resistant fabric if the potential for fire or electric arc flash exists.
Do not knowingly enter an environment in which the concentration of flammable gas is within flammable or explosive limits when wearing a Tychem® garment, including when wearing a Tychem® 6000 FR garment. Retreat immediately if you encounter such an environment while wearing any Tychem® garment, including Tychem® 6000 FR.
No Tychem® garment, including Tychem® 6000 FR,is intended for fire fighting activities, nor for protection from hot liquids, steam, molten metals, welding, or thermal radiation. Tychem® 6000 FR garments are designed and tested to help reduce injury during escape from a fire and to provide some protection from electric arcs.
Wearing garments made of Nomex® or any other flame-resistant fabric under Tychem® garments, other than Tychem® 6000 FR, will not reduce burn injury during a fire or electric arc exposure. Other than Tychem® 6000 FR, Tychem® garments will burn and possibly melt when exposed to a fire or electric arc flash; this may increase burn injuries even when worn over garments made of Nomex® or any other flame-resistant fabric.
And because Tychem® garments melt, except for Tychem® 6000 FR do not wear Tychem® garments under a garment made of Nomex® or any other flame resistant fabric if the potential for fire or electric arc flash exists.
Do not knowingly enter an environment in which the concentration of flammable gas is within flammable or explosive limits when wearing a Tychem® garment, including when wearing a Tychem® 6000 FR garment. Retreat immediately if you encounter such an environment while wearing any Tychem® garment, including Tychem® 6000 FR.
No Tychem® garment, including Tychem® 6000 FR,is intended for fire fighting activities, nor for protection from hot liquids, steam, molten metals, welding, or thermal radiation. Tychem® 6000 FR garments are designed and tested to help reduce injury during escape from a fire and to provide some protection from electric arcs.
In what ways can I dispose of TYCHEM® 4000 garments ?
If not contaminated, TYCHEM® 4000 garments may be landfilled or incinerated in accordance with local regulations. Uncontaminated chemical protective garments may be incinerated in a facility that is capable of handling mixtures containing plastics. Likewise, an uncontaminated chemical protective garment may be buried in a facility that accepts plastic materials. TYCHEM® 4000 garments may contain several different materials; they are not suitable for recycling.
Contaminated garments that cannot be handled safely without protective equipment must be disposed of with other hazardous wastes, either through incineration or landfill per local regulations.
Before discarding, cut off a sleeve or a leg so the garments cannot be worn again as protective clothing.
Contaminated garments that cannot be handled safely without protective equipment must be disposed of with other hazardous wastes, either through incineration or landfill per local regulations.
Before discarding, cut off a sleeve or a leg so the garments cannot be worn again as protective clothing.
What determines if the garment is contaminated ?
The decision on whether or not a garment has been contaminated is made by local managers responsible for PPE based on an analysis of the incident in which the garment was used. This analysis may include exposure time, chemicals involved, level of exposure, proximity to the actual release, tasks performed and environmental monitoring in the area in which the garment was worn. Garments that are damaged, altered or show signs of contamination, such as discoloration, odor, stiffening or cracks, should not be used.
Where can I find a SDS (Safety Data Sheet) for TYCHEM® 4000 garments?
Safety Data Sheets (SDS) are written in accordance with applicable federal regulations, 29 CFR 1910.1200, to communicate health and safety data on usage and handling of hazardous chemicals. Under this regulation, DuPont™ Tyvek®, ProShield®, and Tychem® materials and garments are defined as articles, not chemicals, and the SDS and labeling requirements in that standard do not apply.
What is the ambient working temperature range for TYCHEM® 4000 garments?
Tychem® garments can be worn in ambient temperatures of -13°F (-25°C) to 165°F (74°C).
In colder environments, Tychem® garments can become stiff. If cold enough, the fabric may even become brittle. Please be aware that the heat stress of the wearer becomes a greater concern in higher ambient temperatures. At higher temperatures, chemical hazards can become more aggressive. Breakthrough times and permeation rates may change at higher temperatures. The published permeation data per ASTM F739 is performed at ambient temperatures (approximately 72-81° F ; 22-27° C).
Caution: Tychem® fabrics offer little or no thermal insulation to protect the wearer's skin from prolonged exposure to hot or cold.
In colder environments, Tychem® garments can become stiff. If cold enough, the fabric may even become brittle. Please be aware that the heat stress of the wearer becomes a greater concern in higher ambient temperatures. At higher temperatures, chemical hazards can become more aggressive. Breakthrough times and permeation rates may change at higher temperatures. The published permeation data per ASTM F739 is performed at ambient temperatures (approximately 72-81° F ; 22-27° C).
Caution: Tychem® fabrics offer little or no thermal insulation to protect the wearer's skin from prolonged exposure to hot or cold.
In what ways can I manage or prevent heat stress?
Chemical protective clothing can interfere with the natural regulation of body temperature. This can lead to a rise in core body temperature and heat stress. Implementing a conservative work/rest schedule or using a cooling system may be effective in reducing heat stress. (Note: Do not wear cooling vests in potentially flammable or explosive environments.) .)
Be aware of the symptoms and treatment of heat stress. If you or your co-workers have symptoms of heat stress such as nausea, dizziness, high heart rates, or excessive heat build-up, leave the work area immediately and remove the ensemble as quickly as possible after decontamination and seek professional care.
The maximum length of time the chemical protective clothing can be worn depends on variables such as the air supply, ambient conditions, climate inside the ensemble, physical and psychological conditions of the wearer, work rate and work load. The TLV® pocket guide from the American Conference of Governmental Industrial Hygienists (ACGIH, Cincinnati) provides corrected heat stress limits for some garments. Similar information is available on the federal OSHA web site (www.OSHA.gov). The WBGT correction factor for chemical protective garments is at least 10°C or higher for chemical garments made of impervious films (such as Tychem® garments) and covering the entire body (hooded coverall or encapsulating designs). For Tyvek® coveralls, the WBGT correction factor is 2°C with a hood and 1°C without a hood.
Be aware of the symptoms and treatment of heat stress. If you or your co-workers have symptoms of heat stress such as nausea, dizziness, high heart rates, or excessive heat build-up, leave the work area immediately and remove the ensemble as quickly as possible after decontamination and seek professional care.
The maximum length of time the chemical protective clothing can be worn depends on variables such as the air supply, ambient conditions, climate inside the ensemble, physical and psychological conditions of the wearer, work rate and work load. The TLV® pocket guide from the American Conference of Governmental Industrial Hygienists (ACGIH, Cincinnati) provides corrected heat stress limits for some garments. Similar information is available on the federal OSHA web site (www.OSHA.gov). The WBGT correction factor for chemical protective garments is at least 10°C or higher for chemical garments made of impervious films (such as Tychem® garments) and covering the entire body (hooded coverall or encapsulating designs). For Tyvek® coveralls, the WBGT correction factor is 2°C with a hood and 1°C without a hood.
Are TYCHEM® 4000 garments anti-static or static dissipative?
The substrate used to make TYCHEM® 4000 garments is treated with a topical antistatic agent to help minimize static build up and reduce nuisance garment cling.
In situations where static dissipation level is a critical performance property, end-users should evaluate the performance of their entire ensemble as worn including outer garments, inner garments, footwear and other PPE. In order for any garment system to be static dissipative, it must be able to drain a charge buildup through proper grounding devices, such as, but not limited to, workstation grounding clips or static-dissipative floors.
Under certain conditions, such as cold and dry weather, it is possible that garments might build and discharge static electricity. Discharges are not normally dangerous except in situations where the generation of an electrical spark could ignite a flammable atmosphere or startle the wearer. When operating around flammable chemicals, take steps to eliminate potential static discharges. In these situations, suggested steps include, but not limited to, water spray, the use of an overcover, raising humidity level of the work area, use of a commercial, anti-static application coating, grounding straps on equipment and personnel, inherently static-dissipating under- and over-garments, and testing of the worker's static dissipation before entry into the classified area.
However, in the case of explosive or flammable atmospheres, even if steps are taken to manage static formation and dissipate static charge, the risk of severe injury remains if an uncontrolled or accidental ignition occurs. Do not wearTYCHEM® 4000 chemical protective garments in potentially flammable or explosive atmospheres. Do not knowingly enter an environment in which the concentration of flammable gas is within flammable or explosive limits while wearing a TYCHEM® 4000 garment. If you determine that you are in a potentially flammable or explosive environment, retreat immediately.
In situations where static dissipation level is a critical performance property, end-users should evaluate the performance of their entire ensemble as worn including outer garments, inner garments, footwear and other PPE. In order for any garment system to be static dissipative, it must be able to drain a charge buildup through proper grounding devices, such as, but not limited to, workstation grounding clips or static-dissipative floors.
Under certain conditions, such as cold and dry weather, it is possible that garments might build and discharge static electricity. Discharges are not normally dangerous except in situations where the generation of an electrical spark could ignite a flammable atmosphere or startle the wearer. When operating around flammable chemicals, take steps to eliminate potential static discharges. In these situations, suggested steps include, but not limited to, water spray, the use of an overcover, raising humidity level of the work area, use of a commercial, anti-static application coating, grounding straps on equipment and personnel, inherently static-dissipating under- and over-garments, and testing of the worker's static dissipation before entry into the classified area.
However, in the case of explosive or flammable atmospheres, even if steps are taken to manage static formation and dissipate static charge, the risk of severe injury remains if an uncontrolled or accidental ignition occurs. Do not wearTYCHEM® 4000 chemical protective garments in potentially flammable or explosive atmospheres. Do not knowingly enter an environment in which the concentration of flammable gas is within flammable or explosive limits while wearing a TYCHEM® 4000 garment. If you determine that you are in a potentially flammable or explosive environment, retreat immediately.
How should TYCHEM® 4000 garments be stored?
Store TYCHEM® 4000 garments in a cool, dark, dry location free of dirt and insects. Sunlight, ozone, high temperatures (>120° F ; 49° C), vehicle exhaust fumes, compression under heavy weights and sharp edges or projections are some conditions known to degrade the materials in these garments.
Store TYCHEM® 4000 garments in boxes, in bags or on hangers. Never step on protective garments. Never place or store heavy objects on top of protective garments.
Store TYCHEM® 4000 garments in boxes, in bags or on hangers. Never step on protective garments. Never place or store heavy objects on top of protective garments.
Is it possible to wash and re-use TYCHEM® 4000 garments?
DuPont does not recommend washing contaminated TYCHEM® 4000 garments for re-use. These garments are designed for limited-use. They can be worn until damaged, altered or contaminated. However, if the garments have not been contaminated, they can be cleaned for hygienic purposes and re-used. Please refer to the section on Decontamination and Cleaning in the Tychem® User Manual - Encapsulated for more information.
Are TYCHEM® 4000 garments latex free?
After January 2023, all DuPont Personal Protection product styles are manufactured under specifications that exclude components containing natural rubber latex.
Tyvek® 500, Tyvek® 600, Tyvek® 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
What is the shelf life of TYCHEM® 4000 garments?
Tychem® garments may be used for 5 years from the date of manufacture as long as all of the following conditions are met:
- The garment has been stored properly (view storage conditions)
- The garment has not been damaged, altered or contaminated
- The garment passes a full visual inspection (view garment inspection instructions)
Can TYCHEM® 4000 garments be worn in cleanroom applications?
TYCHEM® 4000 garments have not been designed for controlled environment applications. DuPont offers a full line of garments that have been specially manufactured, processed and packaged for use in controlled environment applications. Please see our complete line of controlled environment products at www.safespeccleanroom.dupont.com.
DUPONT™ SAFESPEC™ Terms of Use
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tool (“Tool”) is intended to assist in choosing protective clothing styles for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment (“PPE”), such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required. Supplying the proper hazard/chemical and exposure information for your hazard scenario is critical in order to obtain suggestions of possible garment options for your consideration. Inaccurate information could result in improper suggestions. Since there are other factors involved which could affect the final PPE decision and may not be considered in this Tool, the final decision on protective clothing selection is the responsibility of the buyer, safety professional, industrial hygienist and end-user. DuPont de Nemours, Inc. or its affiliates DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR ANY INFORMATION OR SUGGESTIONS PROVIDED BY THE TOOL OR THE USE THEREOF.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will be unsuitable. It is the responsibility of the user to review available data and verify that the garment selected is appropriate for the intended use and meets all specified government and industry standards.
Search by :
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical or Other Hazard Name
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Hazard Concentration information
Please read following
- You have selected a chemical that has been tested at multiple concentrations. All concentrations will be displayed on the next page so that you can review breakthrough times for each concentration.
- Please review FAQs if your hazard concentration is lower or higher than the tested concentrations
Need Help?
- If you see your CAS number in the drop down list, make sure you are selecting the hazard from the drop down list before clicking "Add to List".
- If you do not see your CAS number listed, check the number and try again or you may want to try Guide.
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 2 of 3
CHEMICAL COMPARISON
The table below shows the Normalized Breakthrough times of fabrics for the hazards selected. (Testing Details) You can find specific garments that protect against these hazards by clicking the 'Next' button below.
Done
Done
Done
TYVEK
|
TYCHEM
|
GLOVES
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 3 of 3
Flammable Environments
WARNING
If any of the following apply:
- A fire or electric arc is actively present in the work environment
- The work environment contains an uncontrollable flammable material between the Lower Explosive Limit (LEL) or Lower Flammable Limit (LFL) and the Upper Explosive Limit (UEL) or Upper Flammable Limit (UFL)
- The work environment has been subject to a breach or loss in containment of flammable material (flammable liquids, flammable vapors or combustible dusts)
- There is an uncontrolled fuel source available in the work environment (that may or may not have encountered an ignition source yet)
Please consider fire fighter PPE (personal protective equipment). Read more.
If none of these conditions apply but FR clothing is required in your working environment, close this box and proceed to the next question. Only fabrics that provide both chemical resistance to the hazards you have listed and protection during escape from a flash fire will be considered for your hazard scenario.
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
step3of3
Is Suitable For Hazard Scenario
Is Not Suitable For Hazard Scenario
| Hazard | Fabric/Materials | Seam | Design |
|---|
Compare All
YOU MAY WANT TO CONSIDER SIMILAR PRODUCTS RELATED TO SL278B WH
Matching Products (0)
Your hazard scenario did not produce any results. May we suggest:
- If you are searching multiple hazards at one time, try breaking your search into separate hazards by either creating a new scenario or unchecking Hazards in the pane to the left. SafeSPEC™ is trying to find one garment that can be used for all of your hazards. You may need to consider more than one garment.
- If you have a liquid or vapor chemical hazard, try searching the Chemical Resistance Database. This database will show you permeation data for all of the fabrics tested against a given hazard. Once you are able to determine a suitable fabric, you will have the flexibility of selecting a suitable garment design and seam construction yourself.
- If you answered "yes" to the question that you are working in an environment that requires flame resistant clothing, please note that although DuPont has several garment options for scenarios involving possible industrial fire or electric arc exposures as well as chemical exposure hazards, these garments may not have been tested against the specific chemical hazard(s) that you have selected or may have breakthrough times lower than your intended work duration. If possible, try to mitigate the need for flame resistant clothing by implementing engineering controls, work practices and administrative controls before resorting to protective clothing. Additionally, try breaking your search into separate hazards as suggested above in order to find garment options to meet your needs.
- If you selected "localized to the feet" for the direction of exposure question, you may want to consider chemical resistant boots instead of purchasing a full garment. DuPont does not manufacture or sell chemical resistant boots. However, we do offer some coveralls and encapsulated suits with attached socks. These socks can be worn as an extra layer of protection inside of chemical resistant boots.
If you still need help, please Contact Us.
Is Suitable For Hazard Scenario
Is Not Suitable For Hazard Scenario
| Hazard | Fabric/Materials | Seam | Design |
|---|
Hover over image to zoom
| Name | Description |
|---|---|
| Full Part Number | SL278BWHxx0012yy (xx=size;yy=option code)  |
| Fabric/Materials | TYCHEM® 4000 |
| Design | Apron w/ Long Sleeves, Extra Long |
| Seam | Bound |
| Color | White |
| Sizes | 00 |
| Quantity/Box | 12 per case |
| Option Codes | 00 |
Technical Data Sheet
FEATURES & PRODUCT DETAILS
DuPont™ Tychem® 4000 delivers effective protection against a range of chemical environments. Tychem® 4000, utilizes Saranex™ 23-P film laminated to Tyvek® fabric to provide a rugged and durable fabric that resists abrasion. Tychem® 4000 fabric provides at least 30 minutes of protection against >124 chemical challenges. Typical applications: chemical mixing, hazardous remediation, emergency medical response, paint spraying, and nuclear environments.
- Calf-length (52") apron/gown design with attached sleeves
- Provides enhanced frontal protection
- Tightly sewn seam is covered with garment fabric to reinforce seam and reduce potential for particle penetration
- Open back for wearer comfort
- Bound yoke neck opening with snaps
- Elastic opening for tighter fit at wrist
- Ties at waist
- One size fits most
- Manufactured under specifications that do not contain natural rubber latex
FINISHED DIMENSIONS
| Size | Sleeve Length | Chest Width | Body Length |
|---|---|---|---|
| UNI | 21 1/2 | 28 1/2 | 49 3/4 |
ADDITIONAL EQUIPMENT NEEDED
- Please read, understand and follow the Tychem® User Manual.
- This garment only provides partial body coverage. It may be worn in combination with other chemical resistant PPE as required based on the hazard assessment.
- Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
AVAILABLE OPTIONS
| Option Code | Description | Sizes | Part Number |
|---|---|---|---|
| 00 | Standard | UNI | SL278BWH00001200 |
SPECIFICATIONS
- The garment shall be constructed of DuPont™ Tychem® 4000 -- a DuPont™ Tyvek® protective fabric laminated with a chemical resistant Dow Saranex™ 23-P film.
- The garment shall be white in color.
- The garment shall be a sleeved apron design.
- The garment shall have bound seams.
- The garment shall have a neck loop with snaps.
- The garment shall have elastic wrists.
- The garment shall be 52" in length.
SIZES
| Article Number | Product Size |
|---|---|
| D13396798 | UNI |
Fabric & Permeation/Penetration Data
Physical Properties
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.
| Property | Test Method | Typical Result |
|---|---|---|
| Basis Weight | ASTM D3776 | 3.6 oz/yd2 |
| Breaking Strength - Grab (CD) | ASTM D5034 | 48 lbf |
| Breaking Strength - Grab (MD) | ASTM D5034 | 44 lbf |
| Burst Strength - Mullen | ASTM D3786 | 71 psi |
| Thickness | ASTM D1777 | 12 mils |
| Wearing Apparel Flammability | 16 CFR 1610 | Class 1 |
- According to EN 14325
- According to EN 14126
- According to EN 1073-2
- According to EN 14116
- According to EN 11612
- Front Tyvek ® / Back
- Based on test according to ASTM D-572
- See Instructions for Use for further information, limitations and warnings
- Larger than
- Smaller than
- Smaller than or equal to
- Not Applicable
- Standard Deviation
PERMEATION DATA
Permeation is the process by which a solid, liquid or gaseouses chemical moves through a protective clothing fabric at a molecular level. Permeation data assist in the selection of the most appropriate protective garment for a particular application and in the estimation of how long it can be safely worn. Standardised test methods are used to determine the resistance of DuPont materials to permeation, the results of which can be selected according to a specific chemical, chemical class or fabric.
| Hazard / Chemical Name | Physical State | CAS | BT Act | BT 0.1 | BT 1.0 | EN | SSPR | MDPR | Cum 480 | Time 150 | ISO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2-(2-Ethoxyethoxy) ethanol | Liquid | 111-90-0 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| 2-Methyl-4-isothiazolin-3-one (20%) | Liquid | 2682-20-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Acetic acid (>95%) | Liquid | 64-19-7 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Acetic acid 2 ethoxy ethyl ester | Liquid | 111-15-9 | 67*/180 | 116*/238 | >480 | 6 | 0.11 | 0.01 | 3.04 | >480 | 6 |
| Acetic acid 2 methoxy ethyl ester | Liquid | 110-49-6 | 60 | >480 | >480 | 6 | 0.03 | 0.005 | 3.97 | >480 | 6 |
| Acetic acid ethenyl ester | Liquid | 108-05-4 | 23 | 24 | 30 | 1 | 20.3 | 0.0139 | |||
| Acetic acid ethyl ester | Liquid | 141-78-6 | imm | imm | imm*/167 | 1.55 | 0.01 | ||||
| Acetic anhydride | Liquid | 108-24-7 | imm*/23 | 12*/48 | >480 | 6 | na | 0.006 | |||
| Acetic chloride | Liquid | 75-36-5 | 23 | 39*/63 | >480 | 6 | 0.146 | 0.006 | |||
| Acetone | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Acetonitrile | Liquid | 75-05-8 | 56 | 60 | >480 | 6 | 0.35 | 0.05 | |||
| Acetyl chloride | Liquid | 75-36-5 | 23 | 39*/63 | >480 | 6 | 0.146 | 0.006 | |||
| Acroleic acid | Liquid | 79-10-7 | >480 | >480 | 6 | <0.1 | 0.029 | ||||
| Acrolein (90%) | Liquid | 107-02-8 | 24 | 24 | 1 | 7.9 | 0.009 | ||||
| Acrylamide (50%) | Liquid | 79-06-1 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Acrylic acid | Liquid | 79-10-7 | >480 | >480 | 6 | <0.1 | 0.029 | ||||
| Acrylic acid n-butyl ester | Liquid | 141-32-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | >480 | >480 | 6 |
| Acrylicamide (50%) | Liquid | 79-06-1 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Acrylonitrile | Liquid | 107-13-1 | 36*/48 | 36*/48 | 2 | 3.2 | 0.0085 | ||||
| Acryloyl Chloride | Liquid | 814-68-6 | imm | imm | imm | na | 0.04 | 441/40 min | 23 | 1 | |
| Allyl alcohol | Liquid | 107-18-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Amino 3,4-dichlorobenzene, 1- (70 °C, molten) | Liquid | 95-76-1 | imm | imm | imm | 17 | 0.001 | ||||
| Amino benzene | Liquid | 62-53-3 | 322 | >480 | >480 | 6 | <0.025 | 0.005 | |||
| Amino diphenyl, 4- (1 mg/ml in Methanol) | Liquid | 92-67-1 | >480 | >480 | >480 | 6 | <0.0273 | 0.0273 | <13 | >480 | 6 |
| Amino ethylethanolamine | Liquid | 111-41-1 | imm | imm | >480 | 6 | <0.3 | 0.005 | |||
| Amino ethylethanolamine (60%) | Liquid | 111-41-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Amino ethylpiperazine | Liquid | 140-31-8 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Amino pyridine, 2- (sat) | Liquid | 504-29-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Ammonia (gaseous) | Vapor | 7664-41-7 | 25 | 26 | 33 | 2 | 0.25 | 0.0024 | |||
| Ammonium hydroxide (2-3% in Householdcleaner) | Liquid | 1336-21-6 | >480 | >480 | 6 | <0.1 | 0.0027 | ||||
| Ammonium hydroxide (32%) | Liquid | 1336-21-6 | 55 | 55 | >480 | 6 | <0.04 | 0.04 | 95 | >480 | 6 |
| Aniline | Liquid | 62-53-3 | 322 | >480 | >480 | 6 | <0.025 | 0.005 | |||
| Antimony pentachloride | Liquid | 7647-18-9 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Benzenamine | Liquid | 62-53-3 | 322 | >480 | >480 | 6 | <0.025 | 0.005 | |||
| Benzene | Liquid | 71-43-2 | imm | imm | imm | >300 | 0.0126 | ||||
| Benzisothiazol 1,2- (20%) | Liquid | 2634-33-5 | >480 | >480 | >480 | 6 | <0.061 | 0.061 | <30 | >480 | 6 |
| Benzyl alcohol | Liquid | 100-51-6 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Bis (4-(2,3-epoxypropoxy)phenyl)propane (80%) | Liquid | 1675-54-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Bis phenol A diglycidyl ether (80%) | Liquid | 1675-54-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Black Liquor (mix) | Liquid | mix | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Bromo methane | Vapor | 74-83-9 | >480 | >480 | 6 | <0.1 | 0.0153 | ||||
| Butadiene, 1,3- (gaseous) | Vapor | 106-99-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Butanal, n- | Liquid | 123-72-8 | 22 | 41 | >480 | 6 | 0.16 | 0.004 | |||
| Butanol, 1- | Liquid | 71-36-3 | >480 | >480 | >480 | 6 | <0.004 | 0.004 | <1.9 | >480 | 6 |
| Butanol, n- | Liquid | 71-36-3 | >480 | >480 | >480 | 6 | <0.004 | 0.004 | <1.9 | >480 | 6 |
| Butanone | Liquid | 78-93-3 | 18 | 18 | 1 | 145 | 0.0116 | ||||
| Butanone oxime, 2- | Liquid | 96-29-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Butenal, 2- | Liquid | 123-73-9 | 34 | 34 | 2 | 14 | 0.0113 | ||||
| Butoxy ethanol, 2- | Liquid | 111-76-2 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | ||
| Butyl acrylate, n- | Liquid | 141-32-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | >480 | >480 | 6 |
| Butyl alcohol, n- | Liquid | 71-36-3 | >480 | >480 | >480 | 6 | <0.004 | 0.004 | <1.9 | >480 | 6 |
| Butyraldehyde, n- | Liquid | 123-72-8 | 22 | 41 | >480 | 6 | 0.16 | 0.004 | |||
| Carbon disulfide | Liquid | 75-15-0 | imm | imm | imm | 15.5 | 0.05 | ||||
| Carburant n° 2 | Liquid | 68476-30-2 | 87*/109 | >480 | >480 | 6 | <0.1 | 0.005 | |||
| Caustic ammonia (2-3% in Householdcleaner) | Liquid | 1336-21-6 | >480 | >480 | 6 | <0.1 | 0.0027 | ||||
| Caustic ammonia (32%) | Liquid | 1336-21-6 | 55 | 55 | >480 | 6 | <0.04 | 0.04 | 95 | >480 | 6 |
| Caustic soda (50%) | Liquid | 1310-73-2 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Cellosolve acetate | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Chemguard S-764P14A | Liquid | mix | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <5 | >480 | 6 |
| Chemidize 727 ND (mix) | Liquid | mix | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Chlorine (gaseous) | Vapor | 7782-50-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Chloro 1-methylbenzene, 2- | Liquid | 95-49-8 | 13 | 13 | 1 | 102 | 0.0204 | ||||
| Chloro 2,3-epoxy propane, 1- | Liquid | 106-89-8 | 15 | 15 | 15 | 1 | >248 | 0.01 | |||
| Chloro acetic acid (80%) | Liquid | 79-11-8 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Chloro acetone (95%) | Liquid | 78-95-5 | 360 | 258 | 258 | 5 | 0.557 | 0.0149 | |||
| Chloro acetyl chloride | Liquid | 79-04-9 | 100 | 120 | 150 | 4 | >3.7 | 0.01 | |||
| Chloro aniline, p- (70 °C, molten) | Liquid | 106-47-8 | imm | imm | imm | 90 | 0.001 | ||||
| Chloro benzenamine, 4- (70 °C, molten) | Liquid | 106-47-8 | imm | imm | imm | 90 | 0.001 | ||||
| Chloro ethene | Vapor | 75-01-4 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Chloro propan-2-one, 1- (95%) | Liquid | 78-95-5 | 360 | 258 | 258 | 5 | 0.557 | 0.0149 | |||
| Chloro toluene, o- | Liquid | 95-49-8 | 13 | 13 | 1 | 102 | 0.0204 | ||||
| Chloroform | Liquid | 67-66-3 | imm | imm | imm | ||||||
| Chlorsulfonic acid | Liquid | 7790-94-5 | >480 | >480 | 6 | <0.1 | 0.038 | ||||
| Chromic acid (CrO3) (44.9%) | Liquid | 1333-82-0 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Cresol o- | Liquid | 95-48-7 | >480 | >480 | 6 | <0.1 | 0.0174 | ||||
| Cresols, mixed isomers | Liquid | 1319-77-3 | 100 | 100 | 90*/130 | 3 | 1.14 | 0.01 | |||
| Cresylic acid | Liquid | 1319-77-3 | 100 | 100 | 90*/130 | 3 | 1.14 | 0.01 | |||
| Croton aldehyde | Liquid | 123-73-9 | 34 | 34 | 2 | 14 | 0.0113 | ||||
| Crude oil | Liquid | 8002-05-9 | 162*/286 | >480 | >480 | 6 | <0.075 | 0.04 | |||
| Crude oil, California | Liquid | 8002-05-9 | 162*/286 | >480 | >480 | 6 | <0.075 | 0.04 | |||
| Cyanoethylene | Liquid | 107-13-1 | 36*/48 | 36*/48 | 2 | 3.2 | 0.0085 | ||||
| Cyanomethane | Liquid | 75-05-8 | 56 | 60 | >480 | 6 | 0.35 | 0.05 | |||
| Cyclo hexanone | Liquid | 108-94-1 | 136 | 136 | 4 | 8 | 0.0158 | ||||
| Cyclo hexyl isocanyte | Liquid | 3173-53-3 | 36*/54 | 1.74 | 0.0202 | ||||||
| Diaminoethane, 1,2- | Liquid | 107-15-3 | >480 | >480 | >480 | 6 | <0.0097 | 0.0097 | <4.7 | >480 | 6 |
| Dichlorbenzen, 1,2- | Liquid | 95-50-1 | imm | 76 | >480 | 6 | 0.8 | 0.005 | 102.5 | >480 | 6 |
| Dichlorbenzen, 1,3- | Liquid | 541-73-1 | imm | 45 | 57 | 2 | 1.8 | 0.005 | 251.7 | nm | |
| Dichlorbenzen, 1,4- (50% in Ethanol) | Liquid | 106-46-7 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Dichlorethane, 1.2.- | Liquid | 107-06-2 | imm | imm | imm | <80 | 0.04 | 676/20 min | 10 | ||
| Dichloro -4,4'-methylenedianiline, 2,2'- (sat in Methanol) | Liquid | 101-14-4 | >480 | >480 | 6 | <0.1 | 0.043 | ||||
| Dichloro aniline, 3,4- (70 °C, molten) | Liquid | 95-76-1 | imm | imm | imm | 17 | 0.001 | ||||
| Dichloro methane | Liquid | 75-09-2 | imm | imm | imm | 30.4 | 0.09 | ||||
| Diesel Fuel Grade D-2 | Liquid | mix | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Diethyl amine | Liquid | 109-89-7 | 15 | 15 | 15 | 1 | 11.5 | 0.05 | |||
| Diethyl aniline crude | Liquid | 91-66-7 | >480 | >480 | 6 | <0.1 | 0.024 | ||||
| Diethyl benzene (95%) | Liquid | 25340-17-4 | 30 | 31 | 42 | 2 | 19.7 | 0.0216 | |||
| Diethyl ethanamine, N,N- | Liquid | 121-44-8 | 12 | 12*/22 | >480 | 6 | 0.23 | 0.04 | |||
| Diethyl ether | Liquid | 60-29-7 | imm | imm | imm | 0.002 | |||||
| Diethyl m-toluidine, N,N- | Liquid | 91-67-8 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Diethylene imide oxide | Liquid | 110-91-8 | 158 | >480 | 6 | 0.114 | 0.014 | ||||
| Diethylene triamine | Liquid | 111-40-0 | imm | imm*/321 | >480 | 6 | <0.15 | 0.005 | 0.3 | >480 | 6 |
| Dimethyl acetamide, N,N- | Liquid | 127-19-5 | 91 | 96 | 115 | 3 | 2.76 | 0.014 | |||
| Dimethyl dichlorosilane | Liquid | 75-78-5 | 46 | >480 | 6 | 0.131 | 0.0208 | ||||
| Dimethyl formamide, N,N- | Liquid | 68-12-2 | 86 | 90 | >480 | 6 | 0.56 | 0.03 | 146 | >480 | 6 |
| Dimethyl hydrazine, N,N- | Liquid | 57-14-7 | 13 | 13 | 11*/47 | 1 | 2.62 | 0.01 | |||
| Dimethyl ketal | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Dimethyl ketone | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Dimethyl maleate | Liquid | 624-48-6 | >480 | >480 | 6 | <0.1 | 0.0232 | ||||
| Dimethyl sulfate | Liquid | 77-78-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Diphenyl methane diisocyanate, 4,4'- (50 °C, molten) | Liquid | 101-68-8 | >480 | >480 | >480 | 6 | <0.0403 | 0.0403 | <19.3 | >480 | 6 |
| Disodium sulfide (60% (slurry)) | Liquid | 1313-82-2 | >480 | >480 | 6 | <0.1 | 0.052 | ||||
| Epichlorohydrin | Liquid | 106-89-8 | 15 | 15 | 15 | 1 | >248 | 0.01 | |||
| Epoxy ethane (gaseous) | Vapor | 75-21-8 | imm | imm | imm | 21.8 | 0.01 | ||||
| Ethane 1,2-diol | Liquid | 107-21-1 | >480 | >480 | >480 | 6 | <0.006 | 0.006 | <2.8 | >480 | 6 |
| Ethane diol dipropanoate, 1,2- | Liquid | 123-73-9 | 34 | 34 | 2 | 14 | 0.0113 | ||||
| Ethane nitrile | Liquid | 75-05-8 | 56 | 60 | >480 | 6 | 0.35 | 0.05 | |||
| Ethane thiol | Liquid | 75-08-1 | imm | imm | imm | 498 | 0.01 | ||||
| Ethanol | Liquid | 64-17-5 | >480 | >480 | 6 | <0.1 | 0.0074 | ||||
| Ethanoyl chloride | Liquid | 75-36-5 | 23 | 39*/63 | >480 | 6 | 0.146 | 0.006 | |||
| Ethoxy ethanol, 2- | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethoxy ethylacetat | Liquid | 111-15-9 | 67*/180 | 116*/238 | >480 | 6 | 0.11 | 0.01 | 3.04 | >480 | 6 |
| Ethyl Cellosolve® | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethyl acetate | Liquid | 141-78-6 | imm | imm | imm*/167 | 1.55 | 0.01 | ||||
| Ethyl alcohol | Liquid | 64-17-5 | >480 | >480 | 6 | <0.1 | 0.0074 | ||||
| Ethyl benzene | Liquid | 100-41-4 | imm | imm | >480 | 6 | <0.25 | 0.005 | 8.7 | >480 | 6 |
| Ethyl ethanamine, N- | Liquid | 109-89-7 | 15 | 15 | 15 | 1 | 11.5 | 0.05 | |||
| Ethyl ether | Liquid | 60-29-7 | imm | imm | imm | 0.002 | |||||
| Ethyl glycol acetate | Liquid | 111-15-9 | 67*/180 | 116*/238 | >480 | 6 | 0.11 | 0.01 | 3.04 | >480 | 6 |
| Ethyl mercaptan | Liquid | 75-08-1 | imm | imm | imm | 498 | 0.01 | ||||
| Ethyl nitrile | Liquid | 75-05-8 | 56 | 60 | >480 | 6 | 0.35 | 0.05 | |||
| Ethylene carboxylic acid | Liquid | 79-10-7 | >480 | >480 | 6 | <0.1 | 0.029 | ||||
| Ethylene diamine | Liquid | 107-15-3 | >480 | >480 | >480 | 6 | <0.0097 | 0.0097 | <4.7 | >480 | 6 |
| Ethylene dichloride | Liquid | 107-06-2 | imm | imm | imm | <80 | 0.04 | 676/20 min | 10 | ||
| Ethylene glycol | Liquid | 107-21-1 | >480 | >480 | >480 | 6 | <0.006 | 0.006 | <2.8 | >480 | 6 |
| Ethylene glycol mono ethyl ether acetate | Liquid | 111-15-9 | 67*/180 | 116*/238 | >480 | 6 | 0.11 | 0.01 | 3.04 | >480 | 6 |
| Ethylene glycol monobutyl ether | Liquid | 111-76-2 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | ||
| Ethylene glycol monoethyl ether | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethylene glycol monomethyl ether | Liquid | 109-86-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethylene glycol monomethyl ether acetate | Liquid | 110-49-6 | 60 | >480 | >480 | 6 | 0.03 | 0.005 | 3.97 | >480 | 6 |
| Ethylene oxide (gaseous) | Vapor | 75-21-8 | imm | imm | imm | 21.8 | 0.01 | ||||
| Ethylene tetrachloride | Liquid | 127-18-4 | imm | imm | imm | 2.28 | 0.03 | ||||
| Ethylene trichloride | Liquid | 79-01-6 | imm | imm | imm | ||||||
| Ferric (III) chloride (50%) | Liquid | 7705-08-0 | >480 | >480 | 6 | <0.046 | 0.046 | ||||
| Fluorobenzene | Liquid | 462-06-6 | imm | imm | imm | >500 | 0.1 | ||||
| Fluoroboric acid (48-50%) | Liquid | 16872-11-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Fluorosilicic acid (33-35%) | Liquid | 16961-83-4 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Formaldehyde (37%) | Liquid | 50-00-0 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Formalin (37% (10-15% Methanol)) | Liquid | 50-00-0 | >480 | >480 | >480 | 6 | <0.0048 | 0.0048 | <2.3 | >480 | 6 |
| Formalin (37%) | Liquid | 50-00-0 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Formic acid (88%) | Liquid | 64-18-6 | >480 | >480 | 6 | <0.1 | 0.019 | ||||
| Fuel-oil no 2 | Liquid | 68476-30-2 | 87*/109 | >480 | >480 | 6 | <0.1 | 0.005 | |||
| Furaldehyde, 2- | Liquid | 98-01-1 | 198*/227 | 1.1 | 0.0155 | ||||||
| Furfural | Liquid | 98-01-1 | 198*/227 | 1.1 | 0.0155 | ||||||
| Gasoline, unleaded | Liquid | 86290-81-5 | imm | imm | imm | 4.8 | 0.03 | ||||
| Gasoline, unleaded E10 (87 Octane) | Liquid | 308066-70-8 | imm | imm | imm | >13.83 | 0.04 | ||||
| Glutaral (50%) | Liquid | 111-30-8 | >480 | >480 | 6 | <0.0161 | 0.0161 | ||||
| Glutaraldehyde (50%) | Liquid | 111-30-8 | >480 | >480 | 6 | <0.0161 | 0.0161 | ||||
| Glycol alcohol | Liquid | 107-21-1 | >480 | >480 | >480 | 6 | <0.006 | 0.006 | <2.8 | >480 | 6 |
| Green Liquor (mix) | Liquid | mix | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Hexamethyl disilazane | Liquid | 999-97-3 | >480 | >480 | 6 | <0.1 | 0.026 | ||||
| Hexamethyl disilazane, 1,1,1,3,3,3- | Liquid | 999-97-3 | >480 | >480 | 6 | <0.1 | 0.026 | ||||
| Hexamethylene diamine (50 °C, molten) | Liquid | 124-09-4 | 60 | 80 | 120 | 3 | >1.52 | 0.01 | |||
| Hexamethylene diisocyanate | Liquid | 822-06-0 | >480 | >480 | >480 | 6 | <0.0271 | 0.0271 | <13 | >480 | 6 |
| Hexane, n- | Liquid | 110-54-3 | imm | imm | >480 | 6 | 0.42 | 0.01 | |||
| Hexanone | Liquid | 108-94-1 | 136 | 136 | 4 | 8 | 0.0158 | ||||
| Hydrazine | Liquid | 302-01-2 | >480 | >480 | 6 | <0.1 | 0.0052 | ||||
| Hydriodic acid (47%) | Liquid | 10034-85-2 | >480 | >480 | 6 | <0.1 | 0.052 | ||||
| Hydrochloric acid (37%) | Liquid | 7647-01-0 | >480 | >480 | 6 | <0.1 | 0.015 | ||||
| Hydrofluoric acid (48-51%) | Liquid | 7664-39-3 | >480 | >480 | 6 | <0.1 | 0.008 | ||||
| Hydrofluoric acid (70%) | Liquid | 7664-39-3 | 98 | 143 | >480 | 6 | <0.5 | 0.04 | 84.8 | >480 | 6 |
| Hydrogen chloride (gaseous) | Vapor | 7647-01-0 | >480 | >480 | 6 | <0.1 | 0.015 | ||||
| Hydrogen fluoride (20-27 °C, gaseous) | Vapor | 7664-39-3 | 93*/133 | 93*/134 | 94*/138 | 3 | 40.1 | 0.0008 | |||
| Hydrogen peroxide (30%) | Liquid | 7722-84-1 | >480 | >480 | 6 | <0.1 | 0.014 | ||||
| Hydroxy 2-nitrobenzene, 1- (70 °C, molten) | Liquid | 88-75-5 | imm | imm | 4.53 | 0.004 | |||||
| Hydroxy toluene | Liquid | 100-51-6 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Hydroxy toluene, o- | Liquid | 95-48-7 | >480 | >480 | 6 | <0.1 | 0.0174 | ||||
| Iodine | Solid | 7553-56-2 | >480 | >480 | 6 | <0.1 | 0.0409 | ||||
| Iodomethane | Liquid | 74-88-4 | imm | imm | imm | 342 | 0.007 | ||||
| Isoamyl alcohol | Liquid | 123-51-3 | >480 | >480 | >480 | 6 | <0.006 | 0.006 | <2.9 | >480 | 6 |
| Isopropanol | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.0097 | 0.0097 | <4.7 | >480 | 6 |
| Isopropanol (70%) | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Isopropyl alcohol | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.0097 | 0.0097 | <4.7 | >480 | 6 |
| Isopropyl alcohol (70%) | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Isopropylidenediphenol diglycidyl ether, 4,4'- (80%) | Liquid | 1675-54-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| JP-4 Jet Fuel | Liquid | 50815-00-4 | imm | imm | imm*/22 | >13 | 0.05 | ||||
| JP-8 Jet Fuel | Liquid | 94114-58-6 | 27 | 39*/67 | >480 | 6 | 0.61 | 0.01 | |||
| Kerosene | Liquid | 8008-20-6 | 69 | 0.185 | 0.0185 | ||||||
| Ketone propane | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Lewisite (L), MIL-STD-282 (10 g/m2) | Liquid | 541-25-3 | >3608 | ||||||||
| MEK | Liquid | 78-93-3 | 18 | 18 | 1 | 145 | 0.0116 | ||||
| Maleic anhydride (66 °C, molten) | Liquid | 108-31-6 | 12 | 13 | 18 | 1 | 9.2 | 0.016 | |||
| Mercuric II chloride (sat) | Liquid | 7487-94-7 | >480 | >480 | 6 | <0.1 | 0.087 | ||||
| Mercury | Liquid | 7439-97-6 | >480 | >480 | >480 | 6 | <0.09 | 0.09 | <43.2 | >480 | 6 |
| Methanesulphonic acid (70%) | Liquid | 75-75-2 | >480 | >480 | 6 | <0.1 | 0.031 | ||||
| Methanol | Liquid | 67-56-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methoxy 2-methylpropane, 2- | Liquid | 1634-04-4 | 17 | >480 | >480 | 6 | <0.1 | 0.004 | |||
| Methoxy ethanol, 2 | Liquid | 109-86-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Methoxy ethylacetate, 2- | Liquid | 110-49-6 | 60 | >480 | >480 | 6 | 0.03 | 0.005 | 3.97 | >480 | 6 |
| Methyl 2-methyl-2-propenoate | Liquid | 80-62-6 | 23 | 23 | 1 | 161 | 0.0161 | ||||
| Methyl 2-pyrrolidon, N- | Liquid | 872-50-4 | 101 | 101 | 114 | 3 | 4.32 | 0.024 | 1286 | >120 | 4 |
| Methyl Ethyl Ketone Peroxide (35%) | Liquid | 1338-23-4 | >480 | >480 | >480 | 6 | <0.018 | 0.018 | <10 | >480 | 6 |
| Methyl acetyl | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Methyl acrolein | Liquid | 123-73-9 | 34 | 34 | 2 | 14 | 0.0113 | ||||
| Methyl aniline, o- | Liquid | 95-53-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Methyl benzol | Liquid | 108-88-3 | imm | imm | imm | 5.87 | 0.03 | ||||
| Methyl bromide | Vapor | 74-83-9 | >480 | >480 | 6 | <0.1 | 0.0153 | ||||
| Methyl butan-1-ol, 3- | Liquid | 123-51-3 | >480 | >480 | >480 | 6 | <0.006 | 0.006 | <2.9 | >480 | 6 |
| Methyl chloride (-70 °C, liquid) | Vapor | 74-83-9 | >480 | >480 | 6 | <0.1 | 0.0153 | ||||
| Methyl chloride (gaseous) | Vapor | 74-87-3 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methyl cyanide | Liquid | 75-05-8 | 56 | 60 | >480 | 6 | 0.35 | 0.05 | |||
| Methyl ethyl ketone | Liquid | 78-93-3 | 18 | 18 | 1 | 145 | 0.0116 | ||||
| Methyl ethyl ketoxime | Liquid | 96-29-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methyl iodide | Liquid | 74-88-4 | imm | imm | imm | 342 | 0.007 | ||||
| Methyl isocyanate | Liquid | 624-83-9 | imm | imm | imm | 210 | 0.0081 | ||||
| Methyl ketone | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Methyl methacrylate | Liquid | 80-62-6 | 23 | 23 | 1 | 161 | 0.0161 | ||||
| Methyl phenols | Liquid | 1319-77-3 | 100 | 100 | 90*/130 | 3 | 1.14 | 0.01 | |||
| Methyl salicylate | Liquid | 119-36-8 | >480 | >480 | >480 | 6 | <0.006 | 0.006 | <2.9 | >480 | 6 |
| Methyl tert-butyl ether | Liquid | 1634-04-4 | 17 | >480 | >480 | 6 | <0.1 | 0.004 | |||
| Methylen Isocyclohexylamine, 4,4- (50 °C, molten) | Liquid | 1761-71-3 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Methylene bis(2-Chloroaniline), 4,4- (sat in Methanol) | Liquid | 101-14-4 | >480 | >480 | 6 | <0.1 | 0.043 | ||||
| Methylene chloride | Liquid | 75-09-2 | imm | imm | imm | 30.4 | 0.09 | ||||
| Methylene diphenyl diisocyanate, 4,4'- (50 °C, molten) | Liquid | 101-68-8 | >480 | >480 | >480 | 6 | <0.0403 | 0.0403 | <19.3 | >480 | 6 |
| Mineral oil | Liquid | 8012-95-1 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Mineral spirit | Liquid | 64475-85-0 | 190 | >480 | 6 | 0.27 | 0.018 | ||||
| Morpholine | Liquid | 110-91-8 | 158 | >480 | 6 | 0.114 | 0.014 | ||||
| Naphthalene (25% in Diethylene glycol dimethylether) | Liquid | 91-20-3 | 57 | 79 | >480 | 6 | <0.5 | 0.007 | 54 | >480 | 6 |
| Nitric acid (70%) | Liquid | 7697-37-2 | >480 | >480 | 6 | <0.1 | 0.025 | ||||
| Nitro benzene | Liquid | 98-95-3 | 55 | 59 | 78 | 3 | na | 0.05 | |||
| Nitro phenol, o- (70 °C, molten) | Liquid | 88-75-5 | imm | imm | 4.53 | 0.004 | |||||
| Nitro toluene, 2- | Liquid | 88-72-2 | 95 | 95 | 141*/255 | 4 | 2 | 0.07 | |||
| Nitrogen Dioxide (liquid) | Liquid | 10102-44-0 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <20 | >480 | 6 |
| Norflurane | Vapor | 811-97-2 | >480 | >480 | 6 | <0.1 | 0.0164 | ||||
| Oleum (20% free SO3) | Liquid | 8014-95-7 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Oleum (30% free SO3) | Liquid | 8014-95-7 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| PCB 1254 (50% in Mineral Oil) | Liquid | 11097-69-1 | >480 | >480 | 6 | <0.1 | 0.0483 | ||||
| PCB 1254 (90%) | Liquid | 11097-69-1 | >480 | >480 | 6 | <0.1 | 0.0483 | ||||
| Pentachloroantimony | Liquid | 7647-18-9 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Pentanedial, 1,5- (50%) | Liquid | 111-30-8 | >480 | >480 | 6 | <0.0161 | 0.0161 | ||||
| Peracetic Acid (32%) | Liquid | 79-21-0 | 271 | 272 | 282 | 5 | <0.1 | 0.0123 | |||
| Phenethylene | Liquid | 100-42-5 | 16 | 16 | 1 | na | 83.6 | ||||
| Phenol (45 °C, molten) | Liquid | 108-95-2 | 41 | 44 | 79 | 3 | na | 0.05 | <79, 120 min | 148 | 4 |
| Phenol (60 °C, molten) | Liquid | 108-95-2 | imm | imm | imm | <20 | 0.01 | 455/52 min | 31 | 2 | |
| Phenol (85%) | Liquid | 108-95-2 | >480 | >480 | >480 | 6 | <0.006 | 0.006 | <2.9 | >480 | 6 |
| Phenyl amine | Liquid | 62-53-3 | 322 | >480 | >480 | 6 | <0.025 | 0.005 | |||
| Phenyl ethane | Liquid | 100-41-4 | imm | imm | >480 | 6 | <0.25 | 0.005 | 8.7 | >480 | 6 |
| Phenyl ethanol, 1- | Liquid | 98-85-1 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Phenyl glycidyl ether | Liquid | 122-60-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Phenyl trichlorosilane | Liquid | 98-13-5 | >480 | >480 | 6 | <0.1 | 0.0341 | ||||
| Phosphoric acid (85%) | Liquid | 7664-38-2 | >480 | >480 | 6 | <0.1 | 0.039 | ||||
| Phosphorus trichloride | Liquid | 7719-12-2 | imm | imm | imm | >1000 | 0.01 | ||||
| Pimelic ketone | Liquid | 108-94-1 | 136 | 136 | 4 | 8 | 0.0158 | ||||
| Polymethylene polyphenyle isocyanate (p-MDI) | Liquid | 9016-87-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Potassium acetate (sat) | Liquid | 127-08-2 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Potassium chromate (sat) | Liquid | 7789-00-6 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Potassium hydroxide (45%) | Liquid | 1310-58-3 | >480 | >480 | >480 | 6 | <0.1 | 0.023 | >480 | ||
| Prop-2-en-1-al (90%) | Liquid | 107-02-8 | 24 | 24 | 1 | 7.9 | 0.009 | ||||
| Propan -2-ol | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.0097 | 0.0097 | <4.7 | >480 | 6 |
| Propan -2-ol (70%) | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Propan -2-one | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Propen 1-ol, 2- | Liquid | 107-18-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Propenamide (50%) | Liquid | 79-06-1 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Propene acid | Liquid | 79-10-7 | >480 | >480 | 6 | <0.1 | 0.029 | ||||
| Propenenitrile, 2- | Liquid | 107-13-1 | 36*/48 | 36*/48 | 2 | 3.2 | 0.0085 | ||||
| Propenoic acid butyl ester, 2- | Liquid | 141-32-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | >480 | >480 | 6 |
| Propenoic acid nitrile | Liquid | 107-13-1 | 36*/48 | 36*/48 | 2 | 3.2 | 0.0085 | ||||
| Propyl bromide, n- | Liquid | 106-94-5 | 12 | 12 | 1 | 16.2 | 0.04 | ||||
| Propylene aldehyde | Liquid | 123-73-9 | 34 | 34 | 2 | 14 | 0.0113 | ||||
| Pyridine | Liquid | 110-86-1 | 31 | 31 | 2 | 63.5 | 0.0127 | ||||
| Pyroacetic ether | Liquid | 67-64-1 | 13 | 13 | 29*/258 | 1 | 0.9 | 0.01 | |||
| Sarin (GB), MIL-STD-282 (10 g/m2) | Liquid | 107-44-8 | >4808 | ||||||||
| Silicon tetrachloride | Liquid | 10026-04-7 | 35 | 35 | 35 | 2 | >43 | 0.01 | |||
| Skydrol 4D | Liquid | mix | >480 | >480 | >480 | 6 | <0.0129 | 0.0129 | <6.2 | >480 | 6 |
| Skydrol 5 | Liquid | mix | >480 | >480 | >480 | 6 | <0.0129 | 0.0129 | <6.2 | >480 | 6 |
| Skydrol PE-5 | Liquid | mix | >480 | >480 | >480 | 6 | <0.0129 | 0.0129 | <6.2 | >480 | 6 |
| Sodium bisulphite (38-40%) | Liquid | 7631-90-5 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Sodium cyanide (sat) | Liquid | 143-33-9 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Sodium fluoride (sat) | Liquid | 7681-49-4 | >480 | >480 | 6 | <0.1 | 0.014 | ||||
| Sodium hydroxide (50%) | Liquid | 1310-73-2 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Sodium hypochlorite (15%) | Liquid | 7681-52-9 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Sodium metabisulphite (38%) | Liquid | 7681-57-4 | >480 | >480 | 6 | <0.1 | 0.052 | ||||
| Spectracide® (50% Malathion, 44% Aromatic Solvent) | Liquid | mix | >480 | >480 | >480 | 6 | <0.0242 | 0.0242 | <12 | >480 | 6 |
| Spiritus | Liquid | 64-17-5 | >480 | >480 | 6 | <0.1 | 0.0074 | ||||
| Styrene | Liquid | 100-42-5 | 16 | 16 | 1 | na | 83.6 | ||||
| Sulfur Mustard (HD), MIL-STD-282 (10 g/m2) | Liquid | 505-60-2 | >4808 | ||||||||
| Sulfur dioxide | Vapor | 7446-09-5 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Sulfuric acid (>95%) | Liquid | 7664-93-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Sulfuric acid dimethyl ester | Liquid | 77-78-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Sulfuric acid fuming (20% free SO3) | Liquid | 8014-95-7 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Sulfuric acid fuming (30% free SO3) | Liquid | 8014-95-7 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Tetrachloro ethane, 1,1,2,2,- | Liquid | 79-34-5 | 25 | 25 | 37 | 2 | 75.4 | 0.027 | |||
| Tetrachloro ethylene, 1,1,2,2- | Liquid | 127-18-4 | imm | imm | imm | 2.28 | 0.03 | ||||
| Tetraethyl ammonium hydroxide (35%) | Liquid | 77-98-5 | >480 | >480 | 6 | <0.0237 | 0.0237 | ||||
| Tetraethylene pentamine | Liquid | 112-57-2 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Tetrafluoroethane, 1,1,1,2- | Vapor | 811-97-2 | >480 | >480 | 6 | <0.1 | 0.0164 | ||||
| Tetrahydrofuran | Liquid | 109-99-9 | imm | imm | imm | 238.8 | 0.08 | ||||
| Tetramethyl ammonium hydroxide (25%) | Liquid | 75-59-2 | >480 | >480 | >480 | 6 | <0.025 | 0.025 | <12 | >480 | 6 |
| Thioalkohol | Liquid | 75-08-1 | imm | imm | imm | 498 | 0.01 | ||||
| Titan(IV) chloride | Liquid | 7550-45-0 | imm | imm | 45 | 2 | >497 | 0.01 | |||
| Titanium tetrachloride | Liquid | 7550-45-0 | imm | imm | 45 | 2 | >497 | 0.01 | |||
| Toluene | Liquid | 108-88-3 | imm | imm | imm | 5.87 | 0.03 | ||||
| Toluene diisocyanate, 2,4- | Liquid | 584-84-9 | >480 | >480 | >480 | 6 | <0.0281 | 0.0281 | <13.5 | >480 | 6 |
| Toluene diisocyanate, 2,4- (80%) | Liquid | 584-84-9 | >480 | >480 | 6 | <0.1 | 0.0281 | ||||
| Toluidine, m- | Liquid | 108-44-1 | 201 | >480 | >480 | 6 | 0.08 | 0.005 | |||
| Toluidine, o- | Liquid | 95-53-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Trichlor vinylsilane | Liquid | 75-94-5 | 90 | 100 | 110 | 3 | >1.2 | 0.01 | |||
| Trichloro benzene, 1,2,4- | Liquid | 120-82-1 | 87 | 87 | 175 | 4 | >2.5 | 0.1 | |||
| Trichloro ethanol, 2,2,2- | Liquid | 115-20-8 | >480 | >480 | >480 | 6 | <0.008 | 0.008 | <3.8 | >480 | 6 |
| Trichloro ethylene | Liquid | 79-01-6 | imm | imm | imm | ||||||
| Trichloro methane | Liquid | 67-66-3 | imm | imm | imm | ||||||
| Trichloro phenylsilane | Liquid | 98-13-5 | >480 | >480 | 6 | <0.1 | 0.0341 | ||||
| Trichloro silane | Liquid | 10025-78-2 | 45 | 60 | 60 | 2 | >2.5 | 0.01 | |||
| Triethyl amine | Liquid | 121-44-8 | 12 | 12*/22 | >480 | 6 | 0.23 | 0.04 | |||
| Triethylentetramine (60%) | Liquid | 112-24-3 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Trifluoro acetic acid | Liquid | 76-05-1 | imm | >480 | >480 | 6 | 0.004 | ||||
| Trifluoro methansulfonic acid | Liquid | 1493-13-6 | 66*/88 | >480 | >480 | 6 | 0.009 | ||||
| Trimethyl phosphite | Liquid | 121-45-9 | 208 | 210 | 229 | 4 | na | 0.02 | |||
| VM & P Naphtha | Liquid | 8030-30-6 | imm | imm | 11*/15 | 1 | 21.7 | 0.0201 | |||
| VX Nerve Agent, MIL-STD-282 (10 g/m2) | Liquid | 50782-69-9 | >4808 | ||||||||
| Vinyl acetate | Liquid | 108-05-4 | 23 | 24 | 30 | 1 | 20.3 | 0.0139 | |||
| Vinyl benzol | Liquid | 100-42-5 | 16 | 16 | 1 | na | 83.6 | ||||
| Vinyl carbinol | Liquid | 107-18-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Vinyl chloride | Vapor | 75-01-4 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Vinyl cyanide | Liquid | 107-13-1 | 36*/48 | 36*/48 | 2 | 3.2 | 0.0085 | ||||
| Vinyl ethylene (gaseous) | Vapor | 106-99-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Vinyl magnesium chloride (15% in Tetrahydrofuran) | Liquid | 3536-96-7 | imm | imm | imm | 3.27 | 0.01 | ||||
| Vinyl pyridine, 4- | Liquid | 100-43-6 | 15 | 15 | 45 | 2 | >1.93 | 0.01 | |||
| White Liquor | Liquid | mix | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
SPECIAL WARNINGS
- *Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
- *CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation, no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve® and Selexol™ are registered trademarks of Dow Chemicals Company. Skydrol® is a registered trademark of Solutia. - Tyvek® 500, Tyvek® 600, Tyvek® 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
BIOLOGICAL BARRIER
Detailed information on the protective performance (resistance to penetration) of DuPont clothing when exposed to biologically contaminated aerosols, liquids and dusts as well as blood, body fluids and blood-borne pathogens. Sorted by relevant European standard.
| Property | Test Method | Typical Result |
|---|---|---|
| N/A | N/A | N/A. |
- According to EN 14126
- Larger than
- Smaller than
- Smaller than or equal to
PENETRATION AND REPELLENCY
A specific test method, EN ISO 6530, is used to measure the indexes of penetration, absorption and repellency of protective clothing material exposed to liquid chemicals. Results listed here reflect the penetration resistance and repellency of DuPont fabrics to 30% sulphuric acid and 10% sodium hydroxide.
| Property | Test Method | Typical Result |
|---|---|---|
| N/A | N/A | N/A. |
- According to EN 14325
- Larger than
- Smaller than
- Smaller than or equal to
View by:
✕
✕
To access secured content from DuPont Please Sign In or Sign Up below