Tyvek / Tyvek® 500 Accessory

TYPH30SWHL0

Tyvek® 500 Accessory

DuPont™ Tyvek® 500 Hood model PH30L0. Wide flange and elastic around neck and face. Stitched internal seams. White.

 
 
 
Hover over image to zoom

Name Description
Full Part Number TYPH30SWHL0
Fabric/Materials Tyvek®
Design Hood
Seam Stitched (internal)
Color White
Sizes 0
Quantity/Box 100 per box, bulk packed.

FEATURES & PRODUCT DETAILS

DuPont™ Tyvek® 500 Hood model PH30L0. Hood with flange and elasticated face and neck. Available in white and in one size.
Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.
Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.
Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others.

  • Certified according to Regulation (EU) 2016/425.
  • Partial body chemical protective clothing, Category III, Type PB [6-B].
  • EN 14126 (barrier to infective agents)
  • Antistatic treatment (EN 1149-1) - on both sides; see footnotes

ADDITIONAL EQUIPMENT NEEDED

SIZES

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Abrasion Resistance 7 EN 530 Method 2 >100 cycles 2/6 1
Basis Weight DIN EN ISO 536 41.5 g/m2 N/A
Colour. N/A (598) White N/A
Exposure to high Temperature N/A (598) Melting point ~135 °C N/A
Flex Cracking Resistance at -30°C EN ISO 7854 Method B >4000 cycles N/A
Puncture Resistance EN 863 >10 N 2/6 1
Resistance to water penetration DIN EN 20811 >10 kPa N/A
Resistenza alla rottura per flessione 7 EN ISO 7854 Method B >100000 cycles 6/6 1
Surface Resistance at RH 25%, inside 7 EN 1149-1 < 2,5 • 109 Ohm N/A
Surface Resistance at RH 25%, outside 7 EN 1149-1 < 2,5 • 109 Ohm N/A
Tensile Strength (MD) DIN EN ISO 13934-1 >30 N 1/6 1
Tensile Strength (XD) DIN EN ISO 13934-1 >30 N 1/6 1
Trapezoidal Tear Resistance (MD) EN ISO 9073-4 >10 N 1/6 1
Trapezoidal Tear Resistance (XD) EN ISO 9073-4 >10 N 1/6 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Smaller than or equal to
  •  Not Applicable
  •  Standard Deviation

COMFORT

BIOLOGICAL BARRIER

PENETRATION AND REPELLENCY

GARMENT PERFORMANCE

CLEANLINESS

WARNING

PERMEATION DATA

SPECIAL WARNINGS

To access secured content from DuPont Please Sign In or Sign Up below