Tyvek / Tyvek® IsoClean®

9820 option PI

Tyvek® IsoClean®

DuPont™ Tyvek® IsoClean® Hood/Mask. Bound seams. Bound Head Opening. Ties with Loops for Fit. Pleated Polyethylene Outer. 7"" Wide Mask. White Hood and Blue Face Mask.
Certificates of Sterility Available Here

 
 
 
Hover over image to zoom
Name Description
Full Part Number 9820 option PI
Fabric / Material Tyvek® IsoClean® Sterile
Design Hood/Mask Combo
Seam Bound
Quantity/Box 100 individually packaged

FEATURES & PRODUCT DETAILS

Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.
  • Garments are gamma sterilized to SAL of 10-6
  • Combination hood and mask packaged together
  • Ties with loops for adjustable fit
  • Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
  • Mask is 7" size with pleated polyethylene outer
  • Individually packaged in an opaque bag
  • One size fits most

AVAILABLE OPTIONS

FINISHED DIMENSIONS

ADDITIONAL EQUIPMENT NEEDED

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Bacterial Filtration Efficiency (3.0 micron) ASTM F2101 98.9% 1.2 %
Basis Weight ASTM D3776 1.24 oz/yd2 0.04oz/yd2
Breaking Strength - Grab (CD) ASTM D5034 18 lbf 2 lbf
Breaking Strength - Grab (MD) ASTM D5034 15 lbf 3 lbf
Burst Strength - Mullen ASTM D774 42 psi 8 psi
Hydrostatic Head AATCC 127 80 cm H2O 16 cm H2O
Surface Resistivity (25°C / 55& RH) ASTM D257 <6.3 X109 ohms/square
Wearing Apparel Flammability 16 CFR 1610 Class 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation

Warnings