Tyvek / Tyvek® IsoClean®

IC458B WH option CS

Tyvek® IsoClean®

DuPont™ Tyvek® IsoClean® Boot Cover. Bound Seams. Gripper™ Sole. Covered Elastic Opening. Ties at Ankles. 18" High. White.
Certificates of Sterility Available Here

Hover over image to zoom
Name Description
Full Part Number IC458BWHxx0100yy (xx=size;yy=option code)  Help
Fabric/Materials Tyvek® IsoClean®
Design Boot Cover
Seam Bound
Color White
Quantity/Box 100 per case
Option Codes CS


Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.

  • Garments are gamma sterilized to SAL of 10-6
  • Clean-processed garments offer lowest level of particle shedding within DuPont product portfolio
  • Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration
  • Pleated rayon outer facing
  • Gripper™ soles provide enhanced skid-resistance and durability
  • 18" high boot cover with covered elastic top
  • Full traceability on all sterilized apparel with Certificates of Sterility Available Here





Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Bacterial Filtration Efficiency (3.0 micron) ASTM F2101 98.4% 0.9%
Basis Weight ASTM D3776 1.33 oz/yd2 0.06oz/yd2
Breaking Strength - Grab (CD) ASTM D5034 20 lbf 3lbf
Breaking Strength - Grab (MD). ASTM D5034 14 lbf 2lbf
Burst Strength - Mullen. ASTM D774 44 psi 7psi
Hydrostatic Head AATCC 127 74cm H2O 10cm H2O
Particle Shedding (Helmke Drum) IEST-RP-CC003.3 Category I
Surface Resistivity (25°C / 55% RH) ASTM D257 (1081) 1012ohms/square
Wearing Apparel Flammability 16 CFR 1610 Class 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation




To access secured content from DuPont Please Sign In or Sign Up below